Details page

CN-33 gaseous hydrocarbon intermittent reforming catalyst

BRIEF INTRODUCTION

CN-33 catalyst is applicable to intermittent reforming units for producing ammonia syngas, city gas or hydrogen from natural gas, oil field gas or refinery tail gas.

PERFORMANCE FEATURES

High strength and wear resistance: As the catalyst holds high strength and wear resistance, little of it is broken or worn during usage. The catalyst layer can maintain a small and stable pressure difference.

Strong anti-oxidation: Under similar conditions, less NiAl₂O₄ is generated, compared with other catalysts.

Excellent heat resistance: It can be used in temperatures at a range of 800~1000℃ for a long time and at 1350℃ in a short time without contraction and deformation. When temperatures fluctuate, the catalyst holds stable mechanical strength and not easily broken.

High activity: The catalyst has higher activity compared with foreign catalysts.

TECHNICAL INDICATORS

Catalyst model	CN-33
Appearance	Sphere	Raschig ring
Dimensions (Outer dia. × H × inner dia.) mm	Φ18～20	Φ19×19×9
Bulk density kg/L	1.20～1.35	1.10～1.20
Radial crushing strength N/particle	≥1000	≥450
Content of active component (NiO) wt %	≥10	≥10
Carrier	Composite oxides	Composite oxides

Note: Catalysts in other dimensions or appearances are according to customer’s requirements.

PACKAGING

Plastic bags are used as inner packages. Iron drums or rigid plastic drums are used as outer packages.

STORAGE & TRANSPORT

During storage, the catalyst should be kept from damp, frost and contamination. It should be handled with care.

Media Inquiry

Tel：028-85965839