CN-33 catalyst is applicable to intermittent reforming units for producing ammonia syngas, city gas or hydrogen from natural gas, oil field gas or refinery tail gas.
High strength and wear resistance: As the catalyst holds high strength and wear resistance, little of it is broken or worn during usage. The catalyst layer can maintain a small and stable pressure difference.
Strong anti-oxidation: Under similar conditions, less NiAl2O4 is generated, compared with other catalysts.
Excellent heat resistance: It can be used in temperatures at a range of 800~1000℃ for a long time and at 1350℃ in a short time without contraction and deformation. When temperatures fluctuate, the catalyst holds stable mechanical strength and not easily broken.
High activity: The catalyst has higher activity compared with foreign catalysts.
Catalyst model |
CN-33 |
Appearance |
Sphere |
Raschig ring |
Dimensions (Outer dia. × H × inner dia.) mm |
Φ18~20 |
Φ19×19×9 |
Bulk density kg/L |
1.20~1.35 |
1.10~1.20 |
Radial crushing strength N/particle |
≥1000 |
≥450 |
Content of active component (NiO) wt % |
≥10 |
≥10 |
Carrier |
Composite oxides |
Composite oxides |
Note: Catalysts in other dimensions or appearances are according to customer’s requirements.
Plastic bags are used as inner packages. Iron drums or rigid plastic drums are used as outer packages.
During storage, the catalyst should be kept from damp, frost and contamination. It should be handled with care.